Skip to main content

Easy Guide on Rockspace WiFi Extender Setup

 In this blog we will discuss easy steps for Rockspace wifi extender setup. There are two methods to set up your rockspace Extender, follow the steps below to extend your Wi-Fi. 

Rockspace wifi extender setup


Before you start-

Connect the extender to a plug near your router. Wait until the Power LED on the device turns blue.

Method 1: Rockspace wifi extender setup Via the WPS Button-

(1) On the router, press the WPS button.

(2) Press the WPS button on the extender within 2 minutes.

(3) Wait until the extender's Signal LED turns blue, indicating a successful connection. If the Signal LED does not turn blue, repeat the procedure or use method 2.


Method 2: Rockspace wifi extender setup Via a Web Browser-

(1) Connect your computer or smartphone to the "rockspace EXT" network of the extender.

When using a computer, unplug any Ethernet cables you may have. When using a smartphone, make sure the mobile data is turned off.

(2) The login screen appears automatically. If it doesn't, open a web browser and type http://re.rockspace.local or http://192.168.0.254 into the address bar to get started. Make your admin password and save it for later use. Next, click.

(3) Select the Wi-Fi network (SSID) you want to extend from the list of available wireless networks.

(4) Enter the Wi-Fi network password you want to extend.

(5) Wait until you see "Extended successfully" on the page!

If you are not able to follow these steps to set it up, you can always contact our Belkin experts for help. Also visit our website.

Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

Easy Guide on TP Link AC750 Setup

  The TP Link AC750 is a dual-band Wi-Fi router that supports both 2.4GHz and 5GHz wireless networks, with a maximum combined speed of 750Mbps. It is designed to provide fast and reliable internet connectivity for homes and small offices. If you are looking for an easy guide on TP Link AC750 setup then you are in the right spot. Read our informative guide to help you with the setup process for the TP Link AC750 WiFi Range Extender. Here are the steps: Plug in the range extender into a power outlet near your existing wireless router. Connect your computer or mobile device to the range extender's network. Look for the network name (SSID) "TP-Link_Extender_XXXXXX" on the available Wi-Fi networks list. The "XXXXXX" represents the last 6 digits of the range extender's MAC address, which can be found on the back of the device. Open a web browser and type " tplinkrepeater.net " in the address bar, or enter the default IP address " 192.168.0.254 ...
Post a Comment
Read more

Quick Guide for Netgear WiFi Extender Reset

Resetting your Netgear WiFi extender can be useful if you are experiencing connectivity issues or if you want to start fresh with your device. Here is a step-by-step guide to resetting your Netgear WiFi extender: Step 1: Locate the reset button on your Netgear WiFi extender . This button is usually located on the back or bottom of the device. Step 2: Use a paper clip or a small pointed object to press and hold down the reset button for about 10 seconds. Step 3: Release the reset button after 10 seconds. The power light on your Netgear WiFi extender will blink for a few seconds, indicating that the device is resetting. Step 4: Wait for the device to complete the reset process. This can take up to a minute or two. Step 5: Once the reset process is complete, the power light on your Netgear WiFi extender will turn solid green, indicating that the device is ready to use. Step 6: Connect your computer or mobile device to the Netgear WiFi extender using the default WiFi network name (SSID) an...
Post a Comment
Read more

How to Setup using Ap.Setup?

  Ap.Setup and 192.168.10.1 are both commonly used as web addresses for accessing the setup page of various wireless routers and access points. Here are the steps to access the setup page using these addresses: Connect your computer or mobile device to the wireless network of your router or access point. Open a web browser on your computer or mobile device. In the address bar of the web browser, enter either " Ap.Setup " or " 192.168.10.1 " (without quotes) and press Enter. If you have entered the correct address, you will be directed to the login page of your router or access point. Enter the username and password for your router or access point. If you don't know the default login credentials, check the user manual of your router or access point. Once you have successfully logged in, you will be able to access the setup page of your router or access point. From here, you can configure various settings such as the wireless network name (SSID), wireless passwor...
Post a Comment
Read more